How do I ePrint

ePrint is a cloud-based service that allows you to print from anywhere with an active internet connection. Email the photo or document that you need to print directly to the printer.

Steps for ePrinting

• Locate the Power button on the printer and turn it on.
• Place plain paper in the input tray.
• Touch the HP ePrint button and press Setup to turn on web services in the touchscreen displays.
• Find the email address that displays.
• Create a new email with the personal account.
• Type the email address in the To filed.
• Type a subject in the subject line.
• Attach the document or photo and choose Send.

Elaborate steps for ePrinting

• Load paper in the input tray and ensure that the toner or the ink cartridges are installed.
• On the printer, tap the HP ePrint icon or button. Then touch Setup and turn on web services in case of touchscreen displays.
• Navigate to Network Setup, Web Services Setup or Wireless Settings to turn on web services in case of text-based displays.
• If web services are already enabled, press Print Info or Print. The printer's email address displays on the control panel and an info page also prints with the printer’s email address.
• Find the ePrint email address that displays. If the printer’s email address does not display, wait for few hours and try printing the info page again.
• For printers without a touchscreen or text based display, connect the printer to the web and then get the printer email address.
• Then, to print a photo or document saved on your computer or chromebook, create a new email with the personal email account. And, type the printer’s email address in the To field.
• Type a subject in the email subject lane. Then, attach the document or photo to the email and select Send.
• To print an email, open the email that you need to print and then choose Forward. Enter the printer email address in the To field and then select Send.
• To print a webpage, open the webpage that you need to print and tap the Ctrl or Command key & the A key to choose the page content. Then tap the Ctrl or Command key and the C key to copy it.
• Open a new blank document, press the Command or Ctrl key & the V key to paste the content into the document. Then, save the document to the computer.
• Attach the document to the email message to the printer and then choose Send.
• To print a document or photo saved on the smartphone or tablet, open the document or photo that you need to print. Press the Action or Share icon. Choose the email option to open the new email message. Then, type your printer’s email address in the To field.
• Type the subject in the email subject line and press Send. To print an email, open the email that you want to print and then press Forward.
• Type the printer’s mail address in the To field and then press Send. To print a webpage, open the webpage that you need to print and press and hold the screen to choose all and copy the content.
• Open a new blank document, press and hold the screen to paste the content into the document, and save the document to the device.
• Attach the document to the email message addressed to the printer and press Send.

To get more information regarding the mobile printing on your printer like airprint, eprint and google cloud print, goto: 123.hp.com

[Guide] How to connect canon printer to iPhone | 123-hp-com.com

[Guide] How to connect canon printer to iPhone | 123-hp-com.com

why won't my hp wireless printer print

Sometimes the HP wireless printer doesn’t print properly. This is because of the common errors that occur like Cartridge Problem, Incompatible Cartridge, Printer Update Problem etc. It is a common issue for printer users. To resolve this, perform basic troubleshooting error solving methods like cleaning the cartridges, updating the printer driver.

Solution for Printer troubleshooting:

• Ensure that the ink cartridges are compatible with the printer model.
• Check and see if the electrical contacts are dirty.
• Clean the ink cartridge and the electrical contacts.
• Replace the cartridge with the new one if the previous one does not solve the issue.
• Cancel all the print jobs if there is the stuck print queue.
• Update the printer driver if needed.
• Make sure that whether there is no paper jam.
• Set the printer as default printer.

Steps to resolve the issue of HP wireless printer printing

• First of all in many cases, printers won’t print because of the printer driver update problem. To solve this, you may need to update or reinstall the printer driver to fix the issue.
• Sometimes when you print something the printer does not print because the default printer is not selected. To solve this, first tap Window logo key and R key on the keyboard at the same time. The Run dialog box opens. Type Control and press Enter.
• This will open the Control Panel and click Devices and Printers. In Printer’s section, right-click and choose Set as Default Printer. If there is a tick mark on the printer, then it is set as a default printer.
• If there is a stuck print queue cancel all print jobs. So first right-click on the printer by opening Devices and Printers and choose See What’s Printing.
• Open Printer menu and then click Open as Administrator. Again open Printer menu and choose Cancel all Documents this time. Click Yes to confirm it.
• If the cartridge is not clean, first open the ink cartridge access door. Remove the ink cartridge and place it on a piece of paper.
• Dip a clean rubber swab or cloth into the distilled water. Squeeze excess of water from it and clean only the copper-colored contacts.
• Wait for about ten minutes to dry the electrical contacts of the ink cartridge. Reinstall the ink cartridge and close the ink cartridge access door.

Get more information regarding the hp printer wireless connection, goto 123.hp.com/setup

I cannot get my printer to work

The printer does not work because of the errors that occur in the printer. So check if the ink cartridges are compatible. Also, you can reset the printer. Check if the ink cartridges are clean or not. Else, clean it by using a lint-free cloth.

Quick steps for printer troubleshooting

• Locate the Power button on the printer and press it.
• Make sure that the latch is down.
• Clean the contacts of the ink cartridge by using a clean, lint-free cloth.
• Remove and reinsert the cartridges again.
• Ensure that the newly installed ink cartridges are compatible.
• Reset the printer by disconnecting the power cord from the rear of the printer with the printer switched on.
• Take the power cord from the rear of the printer and wait for at least 60 seconds.
• Plug in the power cord back to the wall outlet and reconnect the power cord from the rear of the printer.

Detailed steps for printer troubleshooting

• Ensure that the ink cartridges are compatible. Also, ensure that the latch is down by placing the fingers into the slot on the left side of the printer.
• Then, pull to open the access door. And, the carriage moves to the left side of the printer. Wait till the cartridge is idle & silent before you proceed.
• Ensure that the colored dot on the ink cartridge label matches the colored dot on the carriage slot. Push in the front of the ink cartridge to release and pull it towards you to remove from the slot.
• Inspect the ink cartridge for damage and the copper-colored ink cartridge contacts for debris or ink buildup.
• Carefully insert the cartridge into the slot & push the ink cartridge forward till it clicks into place.
• Ensure that the carriage latch is down. And, if the carriage latch is up, press it down till it clicks & close the cartridge access door.
• Also, clean the cartridge contacts by using a clean, lint-free cloth. Keep the fingers into the slot on the left side of the printer. Wait till the carriage is idle and silent.
• Push in the front of the ink cartridge to release and pull the ink cartridge toward you to remove it from the slot.
• With the cloth, wipe the copper-colored contact on the ink cartridge.
• Carefully reinsert the ink cartridge into the slot. And, close the access door.

To know more information to troubleshoot some other problems means, goto: 123.hp.com

how to connect brother MFC l2700dw printer to wifi

Connect brother MFC l2700dw printer to wifi

Enable a Wi-Fi connection using an access point or a router. Secure the Wi-Fi connection using a Network name and password. Enable WLAN on your Brother printer and let the printer to search for the available network. Find your network name in the list of the available networks and enter the security password to connect.

Steps to connect the Brother printer to a Wireless network

• Connect the printer power cable to an AC source and turn it on.
• Turn on your Network router and connect it with a DSL cable or broadband connection.
• Scroll down with the UP and Down arrow key to find the Network option.
• Select the WLAN option and then press the OK option.
• Find and click the Setup Wizard and press OK to confirm.
• Search process starts and the printer display the list of available network.
• Click on your network name and enter the security password.
• Tap OK option to connect to the network connection.

Procedure to connect the brother printer to a Wireless Network

• Connect your printer to an AC source using the AC power cord as a medium. Turn on your Brother MFC-L2700DW printer. Turn on the router connection and connect the router with a DSL cable or a broadband connection. Make sure that the network connection might provide internet service at high-speed.
• 　Load a stack of blank papers in the input paper tray and install the ink cartridges. Turn on your computer, if it is not in operating condition already. Get back to the Brother printer panel screen and tap the Menu button. Hit the Up and Down arrow buttons on the printer and scroll down to Network option and tap the OK option.
• Again press the Up and Down arrow key and choose the WLAN and then tap the OK option. , in the same way, locate the Setup Wizard option and confirm it with OK. When a message appears as WLAN Enable? on the printer's screen enable the wireless connection.
• Make sure that your Brother is placed within the range of the network router. If the printer is set far from the network router, the printer may not recognize the network connection or may receive a weak signal.
• Once your Brother printer finds your router network name, enter the network password to connect to the network. When the printer connected with the wireless network connection, the printer starts to print the Wireless Network Report.
• If the wireless network connection is successful, the printer LCDs a message as connected. But if the connection fails the printer prints to the error code on the network report.
• Connect to the Brother support site and download the updated Full Driver &Software package for your Brother MFC-L2700DW printer. Uninstall the previously installed outdated driver software and install the latest version on your computer. Choose the network connection as Wireless network connection if prompted during the installation. Connect the USB cable if prompted during the driver set up.
• If you find any network connection issues, use the troubleshooting tool to find and resolve the issue automatically. Restart your network router and enable the Wi-Fi connection from a different broadband connection.

To get more information regarding the printer wifi connection: goto: 123.hp.com/setup