why won't my hp wireless printer print

Sometimes the HP wireless printer doesn’t print properly. This is because of the common errors that occur like Cartridge Problem, Incompatible Cartridge, Printer Update Problem etc. It is a common issue for printer users. To resolve this, perform basic troubleshooting error solving methods like cleaning the cartridges, updating the printer driver.

Solution for Printer troubleshooting:

• Ensure that the ink cartridges are compatible with the printer model.
• Check and see if the electrical contacts are dirty.
• Clean the ink cartridge and the electrical contacts.
• Replace the cartridge with the new one if the previous one does not solve the issue.
• Cancel all the print jobs if there is the stuck print queue.
• Update the printer driver if needed.
• Make sure that whether there is no paper jam.
• Set the printer as default printer.

Steps to resolve the issue of HP wireless printer printing

• First of all in many cases, printers won’t print because of the printer driver update problem. To solve this, you may need to update or reinstall the printer driver to fix the issue.
• Sometimes when you print something the printer does not print because the default printer is not selected. To solve this, first tap Window logo key and R key on the keyboard at the same time. The Run dialog box opens. Type Control and press Enter.
• This will open the Control Panel and click Devices and Printers. In Printer’s section, right-click and choose Set as Default Printer. If there is a tick mark on the printer, then it is set as a default printer.
• If there is a stuck print queue cancel all print jobs. So first right-click on the printer by opening Devices and Printers and choose See What’s Printing.
• Open Printer menu and then click Open as Administrator. Again open Printer menu and choose Cancel all Documents this time. Click Yes to confirm it.
• If the cartridge is not clean, first open the ink cartridge access door. Remove the ink cartridge and place it on a piece of paper.
• Dip a clean rubber swab or cloth into the distilled water. Squeeze excess of water from it and clean only the copper-colored contacts.
• Wait for about ten minutes to dry the electrical contacts of the ink cartridge. Reinstall the ink cartridge and close the ink cartridge access door.

Get more information regarding the hp printer wireless connection, goto 123.hp.com/setup